17681 - 1.2m Budget Fibreglass VHF Antenna Deck Kit This affordable powerboat antenna kit contains all you need for a deck fitting. ● Fibreglass 1.2m whip ● 5m of coax cable factory sealed into antenna ● White nylon rotating screw base ● Male PL connector for free end of coax ● Also fit with any standard deck or rail mounted brackets. Specification: Banten Part 353-1 Fibreglass whip 1.2m (4ft) Frequency 156-162 MHz S.W.R. 1.1 Gain 3 db Impedance 50 ohm Max Input 25W DC closed Yes Cable 5m (16ft) RG-58 Base fitting 1”-14 thread nylon base 17671 – 97cm Budget Fibreglass VHF Antenna Masthead Kit This affordable kit contains all you need for a masthead fitting. ● Fibreglass 94cm whip ● 18m of coax cable factory sealed into antenna ● β€œL”, stainless masthead bracket with antenna fixing ● Male PL connector for free end of coax ● Also fit with any standard deck or rail mounted brackets. Specification: Banten Part 352 Fibreglass whip 94cm (3.3ft) Frequency 156-162 MHz S.W.R. 1.3 Gain 3 db Impedance 50 ohm Max Input 25W DC closed Yes Weight 300g (11 oz) Cable 18m (60ft) RG-58 Base fitting Stainless steel β€œL” bracket 17651 - 1.0m Stainless VHF Antenna Masthead Kit The kit contains all you need for a masthead fitting. ● Stainless steel 1.0m, 3mm whip ● 18m of coax cable with antenna joining pieces ● Stand-off, β€œL”, masthead bracket with antenna fixing ● Male PL connector for free end of coax ● Also fit with any standard deck or rail mounted brackets. Specification: Banten Part 152 Stainless steel whip 1m (3.3ft) tapered stainless steel whip Frequency 156-163 MHz S.W.R. 1.1 Gain 0 db Impedance 50 ohm Max Input 50W DC closed Yes Weight 350g (12 oz) Cable 18m (60ft) RG-58 Termination SO 239 female Base fitting Aluminium stand-off β€œL” bracket The kit contains all you need for a Stainless steel 1.0m, 3mm whip 18m of coax cable with antenna Stand-off, β€œL”, masthead bracket Also fit with any standard deck or Top Seller 108| CHANDLERY | BANTEN ANTENNAS 17708 Two-Part 2.4m Fibreglass VHF Antenna This two part 2.4m fibreglass antenna will not produce noise like an aerial extension and is easy to ship and handle. Banten’s ferrule comes in AISI polished stainless steel AISI 316L with white epoxy fibreglass. ● Stainless steel ferrule collar ● FME Connector Mounted ● PL Connector included Specification Banten part 9011 Length 2.4m Package length 1.2m Frequency 156-162 MHz Gain 9 db Impedance 50 ohm Max Input 50W Weight 400g (14 oz) Cable 5m (16ft) RG-58#] FME connector mounted Base stainless steel AISI 316L. Base fitting 1” 14 thread M018_108-115_r1.indd 108 06/03/2018 15:59