31723 Two Part Wind Generator Manufactured in anodised aluminium. Package includes: ● Two part 2.8m support, 50mm diameter ● Two 1.5m struts, support fixing ● 180° adjustable base for sloping decks or transom mount Fitting the wind generator The wind generator is stable when fixed with support struts that are widely spaced. Where, however, this is not possible we recommend the addition of the NOA pulpit clamp and rail fittings (31744 and 31660 25mm). Most wind generators, including Leading Edge Turbines & Aerogen, fit straight onto the 50mm support. Rutland turbines require a sleeve, see below, and bespoke sleeves can be made for unusual brands of turbine. Additional Pulpit Clamp NOA radar and wind mounts are supplied with two 1.5m struts. Where these struts are mounted narrowly to the pole a NOA Pulpit Clamp may be required for additional rigidity. 31743 Noa pulpit Clamp 50mm with twin 25mm rail clamps (10858) 31747 Noa pulpit Clamp 80mm with twin 25mm rail clamps (10838) NOA Rail Fittings A high quality rail fixture used with Noa mounts and fittings. 31660 10803 - Fitting 25 mm 31661 10806 - Fitting 22 mm 31662 10846 - Fitting 30 mm 31663 10847 - Fitting 32 mm 31664 10809 - Double Fitting 25mm 31660 31664 50mm x 3.0m Support Twin 1.5m Struts, support, pole clamp and rail fitting 180° adjustable base 31711 Radar Mount Package (10621) Manufactured in anodised aluminium NOA is Scandinavia’s leading supplier of radar mounts. Package includes: ● 2.1m support, 80mm diameter ● Two 1.5m struts, support fixing and rail fixing (25mm) ● Adjustable foot for sloping decks ● Adjustable top plate for radar housing 2.1m support, 80mm diameter Two 1.5m struts, support fixing and rail fixing (25mm) Adjustable foot for sloping decks Adjustable top plate for radar housing 31725 Noa Strut End Fixing With Screw Down Base (10633) If the struts would be better screwed into the deck Rutland Sleeves Sleeves to enable Rutland turbines to fit onto a 50mm support. 31750 Sleeve for Rutland 913/914 (11561) 31754 Sleeve for Rutland 503 (11562) CHANDLERY | NOA Wind Generator and Radar Mounts 112| M018_108-115_r1.indd 112 06/03/2018 15:59